tell Pager4 3GA.IN4.R2, Installation And User Manual

Page: 45 / 62

45
Camera settings :
Name : in this section you can enter a custom name for your camera. The name entered in this
section will be used for identifying the cameras upon assigning them to events when configuring
events.
Type : the image transfer mode supported by the IP camera:
- Stream : video, continuous content
- Picture : still picture
URL : the path (link) of the given IP camera.
There are multiple methods to obtain the camera URLs. You can use the “
IP Camera
Detector
” software developed by the manufacturer (available on the manufacturer’s website:
www.tell.hu
), the “
ONVIF Device Manager
” software (
http://sourceforge.net/projects/onvifdm ),
or the camera’s own software or technical manual.
In order to access the camera pictures from outside your local network it is necessary
to replace the local IP address and port in the URL obtained using the ONVIF URL
detector program, with the external (WAN) IP address of your router and the external
port, and after this enter the modified URL in the Pager4 programming software.
Example for modification of the stream URL, if using only one camera:
Original URL:
rtsp://192.168.1.240:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using static IP address:
rtsp:// WAN IP :554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using static IP address and username/password:
rtsp:// username:password@WAN IP :554/cam/realm
onitor?channel=1&subtype….
Modified URL in case of using domain name:
rtsp:// domain name :554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using domain name and username/password:
rtsp:// username:password@domain name :
554/cam/realmonitor?channel=1&subtype….
Further details and information on router configuration, port forwarding and dyndns
configuration you can find in the “
Reference guide to the ONVIF camera support function
”
document.