31
Reject call
: the device will reject calls received from the given user phone number, but will
identify the phone number by CLIP service for further actions, which are available by
configuring an
“
incoming call from user
” event for the given phone number at the service
events. By rejecting the calls, the configured actions can be performed free of charge
(except if the given GSM service provider applies a charge for rejected calls as well).
E-mail notification recipients
(Pager4 PRO only
)
:
You can configure up to 4 e-mail addresses (
MAIL1
to
MAIL4
) to which the device will send
notification upon event occurrence, according to the event settings.
Name
: user/recipient name. The name entered in this section will be used upon selecting the
notification channels when configuring events.
E-mail address
: user/recipient e-mail address. You can configure 1 e-mail address per user.
5.2.4 Notification templates
Notification templates should only be configured if reporting to CMS is needed. In this menu you
can configure different templates according to which the device will send reports to CMS servers
and receivers. For quick and easy setup, the device contains 2 built-in templates, named as
“
EMPTY
” and “
DEFAULT
”, which cannot be deleted, but their configuration can be changed if
needed. If you wish to add new notification templates, this should be done prior to configuring
events. Any template can be assigned to any event, thus reports can be directed to the desired
servers and receivers using the desired priorities. Servers/receivers are classified into two
groups, primary and backup. When an event occurs, the given report will be sent to all servers
and receivers configured as primary in the notification template assigned to the given event.
In case that none of the primary servers/receivers are available, the device will try to report to
the servers/receivers configured as backup.
The order of reporting to servers and receivers configured as backup in a template corresponds
to the numbering (1 to 6) of the channels in the template. The priority depends on the
classification of the configured servers/receivers (primary or backup). Primary servers/receivers
will be notified first.
