OptiCon Micro
Installation and Operation Manual
63
Operation
To dial a number from the Phonebook:
LWS-WK
1. Access the Phonebook menu, see section 3.26 above.
2.
Use the [Navigation] button to highlight the Find selection and press the [OK] soft button; the “Enter
Name” prompt is displayed.
3. Enter the first few characters of the name using the dial pad (refer to 3.26.6 Dial Pad Character
Charts). As an
example, press 5 twice for „k‟ and 3 twice for „e‟ to search for Kenny.
4. Press the [Find] soft button to display the matching records. Note, if no characters are entered, all
records are searched.
5. Use the Up and Down navigation buttons to highlight the desired number.
6. Press the Speaker button to dial the number.
GDC-400H/450H
1. Access the Phonebook menu, see section 3.26 above.
2. Use the
[Navigation]
button ( ) to highlight
Find
and press the
[OK]
( ) left soft
button; the “Enter Name” prompt is displayed.
3. Enter the first few characters of the name using the dial pad (refer to refer to 3.26.6 Dial Pad
Character Charts). As an example, press 5 twice for „k‟ and 3 twice for „e‟ to search for Kenny.
4. Press the
[Find]
( ) left soft button to display the matching records. Note, if no characters
are entered, all records are searched
5. Use the Up and Down
[Navigation]
button ( ) to highlight the desired record.
6. When the record is found, press the
[Call]
( ) right soft button to dial the number.
3.26.3 Adding Records to the Phonebook
Operation
To add a record to the Phonebook:
LWS-WK
1. Access the Phonebook menu, see section 3.26 above.
2. Use the
[Navigation]
button to highlight the
Add Entry
selection and press the
[OK]
soft button.
3. Enter the name using the dial pad, up to 14 characters, (see charts in section 3.26.6 Dial pad
Character Charts). Press the
[OK]
soft button to complete the entry. Note, if you enter the wrong
character, use the
[Delete]
soft button to delete a character.
4. Enter the phone number for the record using the dial pad and press the
[OK]
soft button.
5. Select whether or not to use the CO Access code (refer to section 3.26.1 Edit CO Code) and press
the
[OK]
soft button. Selecting the CO Access Code will insert the access code in front of the
number during dialing. The CO Access code is entered in the Phone Settings menu.
6.
“Enter Position” and record number are displayed.
To save with displayed record number, press
[OK]
soft button. To modify the record number, press
Modify soft button and enter the record number, 1 ~ 60, using the dial pad and press the
OK
soft
button. This will store the number as the record entered.
