OptiCon Micro
Installation and Operation Manual
29
Note:
: [Menu], [OK] button on GDC-400H
: [Menu], [OK] button on GDC-450H
RFPI : Radio Fixed Part Identity
Seven Wireless Handsets and/or Keysets can be registered to one LWS-BS.
2.12.1.3 Subscribing LWS-WK to the LWS-BS
To subscribe to the LWS-BS, below procedure is performed on the LWS-WK.
1. Press the
[Menu]
button to display the menu.
2. Highlight
[Phone Register]
using the Navigation up/down key, and then press the
[OK]
soft
button or Navigation „OK‟ key
.
3. Select
[Subscription]
using the Navigation up/down key, and then press
[OK]
soft button or
Navigation
„OK‟ key.
4. Display
[Searching..1]
.
5. The system
[ RFPI (PARK) :
e.g. 01234567890123
]
will be displayed when a system is found.
6. The RFPI (PARK) of your system is available from your System Administrator, or perhaps the
attendant.
7. Press the
[OK]
soft button or Navigation
„OK‟ key. In a few second, a confirmation tone is received
at the LWS-WK.
8. If the subscription fails, repeat procedure from Step 1 to 7 at the LWS-BS and Step 1 to 7 from the
LWS-WK.
2.12.2 Terminating a Subscriptions
To terminate a subscription, below procedure should be performed on the LWS-BS;
1. Press the
[Menu]
button.
2. Press
[Digit 1]
(CONFIGURATION submenu), or select
[1. CONFIGURATION]
using the
Navigation up/down key and
[OK]
Button.
3. Press
[Digit 4]
(STATION REGISTER sub menu), or select [4. STATION REGISTER] using
Navigation up/down key and
[OK]
Button.
4. Press
[Digit 2]
(DEREGISTER submenu), or select
[2. DEREGISTER]
using Navigation
up/down key and
[OK]
Button.
5. Select the phone number using Navigation left/right key (S101~S107)
6. Press Navigation
[OK]
button or
[OK]
soft key.
7. When the subscription is terminated the below message is shown on LWS-BS LCD
STATION: 10X
UNSUBSCRIBED:
SUCCESS
Note:
DEREGISTER
: You want to erase registration information of both LWS-BS and
Wireless terminals (LWS-WK and GDC-400H/450H handsets).
FORCED ERASE:
You want to erase registration information of the relevant Wireless terminal.
(E.g. in case that the terminal is OFF or missed).
In this case the
registration information will be kept in the terminal itself.
All Data ERASE:
You want to erase registration information of all wireless terminals.
In this
case the registration information will be kept in the terminals themselves.
