Telkom OPTICON MICRO, Installation & Operation Manual

Page: 31 / 79

OptiCon Micro
Installation and Operation Manual
25
2.9.3 GDC-400H/450H Wireless Handset
Button Function
[TALK]

Try to make a call
 Redial number saved in handset.
[END/POWER]

Pressing longer than 1 second : Power Off
 Pressing shorter than 1 second :Leave a call back or a message

Pressing shorter than 1 second during incoming: Ignore a call.
[LEFT SOFT / RIGHT SOFT]
You can access to the current functions by pressing the soft button directly below
the function display.
[FLASH/CLEAR]

Talking Mode : Register recall

Flash a call and retry next call
When using pre-dial :

Pressing longer than 1 second : All digits are cleared
 Pressing shorter than 1 second : 1 digit backspace
 When using local functional operation : Function cancel
(It should be pressed longer than 1 second)
[SPEED/PROGRAM]

Post-Dial :

Pressing shorter than 1 second: System speed dial ( SPEED ).
 Pressing longer than 1 second: Start/Finish a system program
(PROGRAM). Same as the FUNCTION button of GDC-345H.
[LEFT]

In an idle state : To view missed call
In MENU : LEFT
[RIGHT/INTERNAL/TRANSFER/HOLD]

Talking Mode :
 Pressing shorter than 1 second: Transfer a call to the other
station(
TRANS ).
 Pressing longer than 1 second: Hold a call / release a holding call ( HOLD ).

In an idle state :
 In MENU : right button
 Home Wireless Terminal : Internal call
 Key-telephone Wireless Terminal : Trying to make a intercom call or a line
call