OptiCon Micro
Installation and Operation Manual
41
Conditions
When a Line is placed on System Hold, the button LED will flash (it will flash at the holding station and will
flash at all other stations).
A call on System Hold can be retrieved from any station allowed access to the Line in the system database
using the Line button or the Held Line call access code.
3.10.2 Hold Recall
Description
When a user places a Line call on hold, a hold timer is activated. If the timer expires, the held call will recall
at the station for the I-Hold Recall time (30sec). If the call remains unanswered, the call is placed on
System Hold and the LWS-BS station also receives a recall for the Attendant Recall time (1minute). If still
unanswered after the Attendant Recall time, the Line call is disconnected and the appropriate circuits are
returned to idle.
Operation
Hold Recall operation is automatic.
3.10.3 Automatic Hold
Description
While on an active Line call, the system will place the call on hold automatically if the user presses a
{Station/Line}
button.
In this case, pressing a
{Line}
button while on a Line call will place the active call on hold and access the
selected Line.
Operation
To use Automatic Hold while on an active Line call:
LWS-BS station
1.
Press the desired feature button or {Line
}
button; the active call is placed on Hold.
Conditions
1.
There is no limit on the number of calls that can be placed on Hold using Automatic Hold up to the
number of Lines connected to the system.
3.11 PARK Code
Description
Is used for the re-programming of PARK code.
Operation
LWS-BS station
To program PARK code:
1.
Press the
[Menu]
button.
2.
Dial 145.
3.
Press
[Change]
soft key and type new PARK code.
