OptiCon Micro
Installation and Operation Manual
59
3.24 Tel/Fax Line
Description
If Tel/Fax Line Mode (Menu 1 3 1) is selected, the system will detect a FAX tone within the fax tone
detection time. After detecting FAX tone, the system sends the call to the SLT/FAX port to respond to it.
If a FAX tone is not detected within the fax tone detection time, the system will transfer the call to the ring
assigned stations for that particular Tel/Fax line.
Operation
To set Tel/fax line:
LWS-BS station
1. Press the
[Menu]
button.
2. Dial 1 3 1.
3. Select
“Tel/Fax” with [Navigation right/left] button.
4. Press
[Save]
soft button.
Conditions
1. The fax tone detection time is 10 seconds.
2. The auto attendant feature isn
‟t applied to Tel/Fax Line
3.25 SLT/Fax/Modem port
3.25.1 Modem Operation
Description
The SLT/Fax port is assigned to the last station number (ex: 108 in 100-108). This port is intended for use
by an SLT, FAX, or modem. When modem use is desired, the “MODEM” (
[Menu]
3 4 7) must be set to
“ON”. In all other cases, the “MODEM” must be set to “OFF”. FAX operation from the port is available
regardless of “MODEM” setting.
Operation
To use FAX machine/single line telephone,
LWS-BS station
1.
Press the
[Menu]
button.
2.
Dial 3 4
7. “Modem” menu.
3.
Select “OFF”.
4.
Press the
[Save]
soft button.
To use FAX machine/modem,
LWS-BS station
1.
Press the
[Menu]
button.
2.
Dial 3 4 7. “Modem” menu.
3.
Select “ON”.
4.
Press the
[Save]
soft button.
