DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 67 of 261
+CNUM - Subscriber Number
AT+CNUM
Execution command returns the MSISDN in the format:
+CNUM: <alpha>
,
<number>
,
<type>[<CR><LF>
+CNUM: <alpha>
,
<number>
,
<type>[…]]
where:
<alpha>
- alphanumeric string associated to
<number>
; used character set should
be the one selected with
+CSCS
.
<number>
- string containing the phone number in the format
<type>
<type>
- type of number:
129 - national numbering scheme
145 - international numbering scheme (contains the character "+").
AT+CNUM=?
Test command returns the
OK
result code
Example
AT+CNUM
+CNUM: "PHONENUM1","2173848500",129
+CNUM: "FAXNUM","2173848501",129
+CNUM: "DATANUM","2173848502",129
Reference
3GPP TS 27.007
+COPN - Read Operator Names
AT+COPN
Returns the operator’s name from the
ME
in the format:
+COPN: <numeric1>,<alpha1>[<CR><LF>
+COPN: <numeric2>,<alpha2>[…]]
Note: In case of CDMA, the network name (operator) is not sent by network.
Moreover, each CDMA carrier’s list of operators is confidential and not given out.
Therefore, the module only supports two result codes:
+COPN: HOME
: If the value of ERI is 1.
+COPN: ROAMING
: If the value of ERI is any other value.
AT+COPN=?
Test command returns the
OK
result code
Reference
3GPP TS 27.007
+CREG - Network Registration Report
AT+CREG=
[<mode>]
Set command enables/disables network registration reports depending on the
parameter
<mode>
.
Parameter:
<mode>
