DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 164 of 261
#SCFG - Socket Configuration
<CR><LF>
. . .
#SCFG: <connId6>,<cid6>,<pktsz6>,<maxTo6>,<connTo6>,<txTo6>
<CR><LF>
AT#SCFG=?
Test command returns the range of supported values for all the sub parameters.
Example
AT#SCFG=?
#SCFG:(1-6),(1),(0,1-1500),(0,1-65535),(10-1200),(0,1-255)
OK
AT#SCFG?
#SCFG: 1,1,300,90,600,50
#SCFG: 2,1,300,90,600,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,1,300,90,600,50
#SCFG: 5,1,300,90,600,50
#SCFG: 6,1,300,90,600,50
OK
#SCFGEXT - Socket Configuration Extended
AT#SCFGEXT=
<connId>,
<srMode>,
<dataMode>,
<keepalive>
[,<unused_A>
Set command sets the socket configuration extended parameters.
Parameters:
<connId>
- socket connection identifier
1..6
<srMode>
-
SRing
URC mode
0 - normal mode (default):
