DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 178 of 261
#FTPPWD - FTP Print Working Directory
AT#FTPPWD=?
Test command returns the
OK
result code.
#FTPCWD - FTP Change Working Directory
AT#FTPCWD=
[<dirname>]
Execution command, issued during an FTP connection, changes the working
directory on FTP server.
Parameter:
<dirname>
- string type, it is the name of the new working directory.
Note: The command causes an
ERROR
result code to be returned if no FTP
connection has been opened yet.
AT#FTPCWD=?
Test command returns the
OK
result code.
#FTPLIST - FTP List
AT#FTPLIST[=
[<name>]]
Execution command, issued during an FTP connection, opens a data connection and
starts getting from the server the list of contents of the specified directory or the
properties of the specified file.
Parameter:
<name>
- string type, it’s the name of the directory or file.
Note: The command causes an
ERROR
result code to be returned if no FTP
connection has been opened yet.
Note: issuing
AT#FTPLIST<CR>
opens a data connection and starts getting from
the server the list of contents of the working directory.
AT#FTPLIST=?
Test command returns the
OK
result code.
#USERID - Authentication User ID
AT#USERID=
[<user>]
Set command sets the user identification string to be used during the authentication
step.
Parameter:
<user>
- string type, it is the authentication User Id; the max length for this value is
the output of Test command,
AT#USERID=?
(factory default is the