Telit Wireless Solutions DE910-DUAL, Reference Manual

Page: 23 / 261

DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 23 of 261
#ECAM, #SMOV, #SKIPESC,
#E2ESC #CFLO
+CALM,
+CRSL, +CMUT,
+CLVL, +VTD, #PCMTXG
#PCMRXG #DVICFG, #CAP,
#SRS, #SRP, #STM,
#DVI, #SHFEC,
#HSMICG,
#SHFSD, #SPKMUT,
#E2SLRI, #DAC, #PSEL,
#HFRECG #HSRECG, #SHFAGC,
#SHSAGC, #SHSEC, #SHSNR,
#SHFNR, #SHSSD, #TSVOL
#E2SMSRI #HFMICG
#TEMPMON (lt is partially stored in NVM, see command description)
The values set by following commands are automatically stored in NVM, without issuing any
storing command and independently from the profile (unique values), and are automatically
restored at start up:
#SELINT,
#DIALMODE, #CODEC,
#SCFG, #SHSFTX,
#SHSFRX #SHFFTX, #SHFFRX,
#SRXAGC, #SHSAGCTX, #SHSAGCRX,
#SHFAGCTX #SHFAGCRX
#DNS #TCPMAXDAT #TCPREASS
#TTY #SMSMOEN #SMSSO
#USERID #PASSW
The values set by following commands are stored in NVM on demand, issuing specific
commands and independently from the profile:
+CSMP
Stored by +CSAS
3
command and restored by +CRES command.
#SLED
Stored by #SLEDSAV command.
#VAUX
Stored by #VAUXSAV command.
#PKTSZ, #DSTO, #SKTTO,
#SKTSET #SKTCT
Stored by #SKTSAV command and automatically restored at start up; factory default values are restored by #SKTRST command.
#ESMTP, #EADDR, #EUSER,
#EPASSW
Stored by #ESAV command and automatically restored at start up; factory default values are restored by #ERST command.
$GPSP,
$GPSAT, $GPSNMUN
Stored by $GPSSAV command and automatically restored at start up; factory default values are restored by $GPSRST command.
3
Both coCSAS and +CRES deal with non-volatile memory