DE910-DUAL AT commands reference guide
80392ST10102A Rev.2 – 2012-07-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 166 of 261
#SCFGEXT - Socket Configuration Extended
Socket 3 set with data amount sring, hex data mode and
no keepalive.
AT#SCFGEXT?
#SCFGEXT: 1,2,0,30,0,0
#SCFGEXT: 2,0,0,0,0,0
#SCFGEXT: 3,1,1,0,0,0
#SCFGEXT: 4,0,0,0,0,0
#SCFGEXT: 5,0,0,0,0,0
#SCFGEXT: 6,0,0,0,0,0
OK
#CGPADDR – Show Address
AT#CGPADDR=<cid
>
Execution command returns the IP address for the current activated CDMA PDP
context
<cid>
- context identifier
Note: Only one context ID (1) is supported.
AT#CGPADDR=?
Return <cid> when modem get the IP address, otherwise return only OK result
Example
AT#SGACT=1,1
+IP: xxx.yyy.zzz.www
OK
AT#CGPADDR=?
#CGPADDR: (1)
OK
AT#CGPADDR=1
#CGPADDR: 1,”xxx.yyy.zzz.www”
OK
#SD - Socket Dial
AT#SD=<connId>,
<txProt>,<rPort>,
<IPaddr>
Execution command opens a remote connection via socket.
Parameters:
