FORUM OPERATION AND MAINTENANCE MANUAL 9601
PAGE 54
RET LEV
Controls the overall level of the Tape return feed to the stereo mix
bus.
ON
When pressed Pled illuminated) the tape return signal is enabled, or
ON.
SOLO
Feeds the tape return signal to the monitoring outputs and main
stereo meters. The feed is internally selectable to be pre- or post-
the level control.
TAPE RETURN 1
HF
A shelving high frequency equaliser section, with gain adjustable
by +/-15dB, at a fixed frequency of 12kHz.
LF
A shelving low frequency equaliser section, with gain adjustable
by +/-15dB, at a fixed frequency of 80Hz.
AUX 1
Adjusts the amount of Tape 1 signal fed to Auxiliary bus 1. The
signal is taken pre or post- the level control, depending on the
position of the PRE/POST switch below the AUX 2 control.
AUX 2
Adjusts the amount of Tape 1 signal fed to Auxiliary bus 2. The
signal is taken pre or post- the level control, depending on the
position of the PRE/POST switch below the AUX 2 control.
PRE/POST
Takes the signal feed for the Auxiliary buses from before or after
the return level control.
PAN
Adjusts the position of the Tape Return signal within the main
stereo mix. When the PAN is hard left, full signal is sent to the left