FORUM OPERATION AND MAINTENANCE MANUAL 9601
PAGE 32
THE DUAL EFFECT RETURN MODULE
This module contains two independent signal paths which can be
used to bring line level signals down onto the stereo mix bus of the
console. As both signal paths are identical it is only neccessary to
describe one.
GAIN
This adjusts the gain of the input between -10dB and +20dB.
HF
Pr/-15dB of gain at 12kHz for high frequency equalisation.
MID
A gain control pr/-15dB of gain over the frequency range
extending from 240Hz to 7kHz. A second control determines the
frequency of operation.
LF
Pr/-15dB of gain at 50Hz for low frequency equalisation.
AUX 1, AUX 2
The controls determine the level of signal sent to auxiliaries 1 and
2. The signal will normally be Pre-fade/Post-EQ but internal links
allow either Pre-fade/Pre-EQ or Post Fader to be selected.
AUX 3, AUX 4
Similar to AUX 1 and 2 but the default signal is Post-fader. Internal
links allow the Pre-fade/Post-EQ and Pre-fade/Pre-EQ signals to be
selected. Note that no routing is possible to auxiliaries 5 and 6.
PAN
Pans the signal across the stereo bus.
LEVEL
Controls the signal level onto the stereo bus.
ON
Allows the signal to the stereo bus to be cut. This also affects the
post fader auxiliary signals.
PFL
Places the Post Fader or Pre-Fade/Post EQ signal onto the solo bus.
The default signal is Prefade.