INSTALLATION INSTRUCTION
21
• Cut all binding yarns, tapes, strength members and fi llers at the point where the sheath was cut.
• Fasten the end of the cable sheath with binders to the side of splice tray which is opposite to the side
where the fi bre tubes of the outdoor cable are fastened.
• Locate the fi bre tubes parallel so that the outermost tube is tube 1 (blue) and the innermost tube is
the last tube (orange or brown).
• Remove
the
fi bre tubes around the fi bre at the point of 100 mm from the point where the sheath was
cut.
o Note. Try fi rst the stripping of the fi bre tubes before the actual work to make sure that you have
a suitable stripping tool. A wrong stripping tool can cause damages or even cut the fi bres!
