FINNFLASH 1000
18
• Mount and lock the panel to the panel frame with two fi nger screws.
5.1.7 Bringing of pigtail cables for splicing
•
Bring the pigtail cable to its splice tray loosely from below the splice tray and from the front side (seen
from the front).
•
Make the cutting marks on the cable to such lengths that the cable length on the splice tray is about
30 mm and the fi bre length on the splice tray is approx. 100 cm, and at least 70 cm.
•
Cut away the extra length from the pigtail cable.
•
Remove the splice tray from the frame and set it on the splicing table.
