Operation
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
94 of 158
(A) Send to Serial: The options are PortNum and Text. Text is
the string that is sent to the port. PortNum refers to the port
number of the Vision instrument.
1 – Host port
2 – Printer
3 – Collector (for AutoPlus) or Vision heater (for tester). This
port is not applicable to the AutoFilter.
(T) Speed Tolerance: This changes the dissolution tester motor
speed tolerance for the protocol. The options are 0 (disabled),
or 1 to 10%.
(T) Status: This allows the user to get an automatic status at the
specified time. The speed and temperature is reported.
(T) Temperature Tolerance: This changes the dissolution tester
temperature tolerance for the protocol. The options are 0
(disabled), or 0.1 to 5.00 °C.
(S) Transfer: The options are Volume, Source, Destination. It
allows the user to transfer a specified volume of solution from a
specified source to a specified destination.
For example, if a transfer of 5 mL from source C to source A is
desired, the parameter would read: 5,C,A.
The following sources/targets are available when using a
Transfer command in the event table of a protocol.
U: This source/target keeps the needles up. It is useful as a
source to pull air into the syringes to dry out the lines. It can
also be used to push any remaining media back to the vessel.
W: This source/target lowers the needles into Home Port 2 of
the AutoFill.
H: This lowers the needles into the Home Port 1 (or waste
port) of the AutoFill.
1-25: This can be used as a target only. This target will lower
the needles into the corresponding row of the rack.
For example, if “10” was entered, the needles would lower in
the 10th row of the installed rack.
D: Keep the collector in the current position when the transfer
will occur. Using D will not lower the needles of the collector
when performing transfers!
X: Current tester.
Summary of Contents for VISION G2 CLASSIC 6
