Operation
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
75 of 158
Log: This button will print the temperature of the selected
position. If a serial validation printer is installed, the
temperatures will print each time the Log button is pressed. If a
PostScript network printer is installed, the temperatures will
print when the operator leaves the Log Instrument
Temperatures screen.
If a test is running, the elapsed time will replace the buttons at
the bottom of the screen. A Log button will appear on the pop-
up when starting or ending a test. This allows the user to log
temperatures before, during, and after a test and ensure those
temperatures will appear in the test log.
Remote Command Screen
Remote Command screen is accessed by touching the Control
button at the bottom of the screen.
This screen provides access to the Vision tester service and
support functions. The button for this screen does not appear to
operators if security features are enabled.
NOTE: The Remote Command screen should only be used
when instructed by THR Technical Support.
Summary of Contents for VISION G2 CLASSIC 6
