Installation
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
40 of 158
11. Touch the IP Address field to edit the IP address. A
numeric keypad will appear to allow the entry. The
IP address must take the form of ###.###.###.###.
To ensure proper communication, the first 3
sections of the IP address must match between the
tester and sampler or printer. Touch OK when
finished.
For example, if the tester has the IP Address
192.168.1.20, then the IP address of the printer
must begin with 192.168.1. For more information on
configuring IP addresses, refer to appendix B.
12. Touch the Gateway Address field to edit the
gateway address. Once again a numeric keypad will
appear and the gateway address must take the form
of ###.###.###.###.
13. Touch the Subnet Mask field to enter the subnet
mask. Once again a numeric keypad will appear and
the subnet mask must take the form of
###.###.###.###. The value of 255.255.255.0 is
recommended.
14. When all the fields on the Device Setup screen have
been updated, touch the exit button located in the
lower right corner of the screen.
Summary of Contents for VISION G2 CLASSIC 6
