Installation
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
48 of 158
2.
Slide the cover so that the spindle shaft is located in
the center hole and unfold the cover. The cover
should rest on the vessel rim such that the notches
fit around the raised keys of the vessel rim.
ADD Cover for Vision
Fig. C-15 ADD Cover for Vision 74-104-152
To install the hinged ADD Cover for Vision testers, with the drive
head down (Elite 8) and shafts in place:
1.
Fold the cover so that a space can be created for
the spindle shaft to slide through. If an AutoMag is
installed, align the cover with the sample probes.
NOTE: This ADD cover is compatible with the
AutoMag, but NOT the SuperMag
.
2.
Slide the cover so that the spindle shaft is located in
the center hole and unfold the cover. The cover
should rest on the vessel rim such that the notches
fit around the raised keys of the vessel rim.
3.
Raise the cover and ensure the door that holds the
sample is closed. Once the door has been closed
lower the ADD Cover for Vision into place.
4.
At the appropriate time open the cap covering the
sample chamber and place the sample inside.
5.
Apply the cap to the sample chamber to protect the
sample from moisture.
6.
Ensure the push pin is installed in the cover.
Summary of Contents for VISION G2 CLASSIC 6
