TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Operating Manual

Page: 10 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
4 NOSP17662
Revision 03
1.6 Optical self-test function
Sensor cartridges have one or more self-test optical lamps allowing detection integrity test. This is
a full optical test where the signal from each test lamp is transmitted through the sensor window
and reflected back to the detecting elements via a polished stainless-steel reflector.
In addition to this cyclic self-test, the test lamps can be used when a "flame simulation test" is
initiated by the maintenance terminal. Further testing is not required to confirm correct operation.
As part of the continuous improvement of our products, we are gradually implementing a new
source of IR self-test whose reliability and repeatability are reinforced to the current version.
However, you will notice that the signal is now invisible to the eye, all the energy dissipated is
limited to the useful infrared band. It is therefore no longer possible to distinguish the lamp
illumination from the correct operation of the measurement chain.
It should be noted that a malfunction of one of them is extremely improbable. Indeed, the
lifetime expected for this source is much longer than 5 years.
1.7 Communication Interface
1.7.1 Wireless Configuration Tool
Information and status of the detector are available via the wireless
configuration tool TLU600.
Configuration and tests are performed using this wireless configuration
tool (IrDA protocol). This tool is common for all TELEDYNE OLDHAM
SIMTRONICS MultiFlame, MultiXplo and MultiTox products.
The TLU600 provides access to devices which, otherwise, would require major logistic operations
for maintenance or for configuration (calibration …).
For more details, please refer to the wireless configuration tool operating manual.
1.7.2 Magnetic wand
The Type-D electronic version includes two magnetic sensors PG1 and PG2 implanted on the
numeric card.
The communication interface is a magnetic wand.The wand can be used only to acess to the
following functions :
•
Alarms acknolodwment
•
CEDP led
•
Flame simulation
•
LT15 mode