TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Operating Manual

Page: 33 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
27
Switches S1 and S2 are used for the UV/IR detection mode as shown in the table below. The
configuration is frozen and cannot be changed with the TLU. Switches S1 and S2 are not used
for the multi-spectrum sensor cartridges (3IR).
Detector mode S1 S2 Comments
UV + 2xIR ON ON Factory setting
UV + 2xIR OFF OFF
UV only ON OFF The detector is now a single UV flame detector.
IR only OFF ON The detector is now a 2xIR flame detector
UV only and IR only configurations are not compliant with CE DPC
certificate.
Moreover, those configurations are more susceptible to trigger false
alarms.
Switches 3 and 4 sets the sensitivity. However, it is overwritten by the software and can be
changed with the TLU600.
Detector mode S3 S4 S5 S6 Comments
100% sensitivity ON ON ON Default
100% sensitivity OFF OFF ON
75% sensitivity OFF ON ON
50% sensitivity ON OFF ON
5 sec delay ON ON OFF = 2 sec delay
S5 always on ON