TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook MultiFlame DF-TV7, Operating Manual

Page: 3 / 64

MULTIFLAME DF-TV7
OPTICAL FLAME DETECTOR
OPERATING MANUAL
NOSP17662
Revision 03
III
Limitation of Liability
The Company TELEDYNE OLDHAM SIMTRONICS S.A.S., hereinafter referred to as “TELEDYNE
OLDHAM SIMTRONICS” throughout this document, shall not be held responsible for any
damage to the equipment or for any physical injury or death resulting in whole or in part from the
inappropriate use or installation of the equipment, non-compliance with any and all instructions,
warnings, standards and/or regulations in force.
No business, person or legal entity may assume responsibility on behalf of TELEDYNE OLDHAM
SIMTRONICS, even though they may be involved in the sale of TELEDYNE OLDHAM
SIMTRONICS products.
TELEDYNE OLDHAM SIMTRONICS shall not be responsible for any direct or indirect damage,
or any direct or indirect consequence, resulting from the sale and use of any of its products
UNLESS SUCH PRODUCTS HAVE BEEN SELECTED BY TELEDYNE OLDHAM SIMTRONICS
ACCORDING TO THE APPLICATION.
Ownership clauses
The drawings, specifications, and information herein contain confidential information that is the
property of TELEDYNE OLDHAM SIMTRONICS.
This information shall not, either in whole or in part, by physical, electronic, or any other means
whatsoever, be reproduced, copied, divulged, translated, or used as the basis for the
manufacture or sale of TELEDYNE OLDHAM SIMTRONICS equipment, or for any other reason
without the prior consent of TELEDYNE OLDHAM SIMTRONICS.
Warning
This is not a contractual document. In the best interest of its customers and with the aim of
improving performance, TELEDYNE OLDHAM SIMTRONICS reserves the right to alter the
technical features of its equipment without prior notice.
READ THESE INSTRUCTIONS CAREFULLY BEFORE THE FIRST USAGE: these instructions
should be read by all persons who have or will have responsibility for the use, maintenance, or
repair of the instrument.
This instrument shall only be deemed to be in conformance with the published performance if
used, maintained, and repaired in accordance with the instructions of TELEDYNE OLDHAM
SIMTRONICS by TELEDYNE OLDHAM SIMTRONICS personnel or by personnel authorized by
TELEDYNE OLDHAM SIMTRONICS.