A C C E S S 2 4 1 - F X O / 2 4 1 / 2 1 1 / 2 1 1 N V O I P G A T E W A Y U S E R G U I D E
MN100129 Rev E
9
Installing your Access 241-FXO VoIP Gateway
1.
Unpack the Gateway unit.
2.
Verify you have the components listed in the
list above.
3.
Place the Gateway on a desktop or other level surface, or mount it on a wall. Choose a
location that is near the devices to be connected and close to an electrical outlet. If you want
to mount the unit on the wall, refer to
Details for Wall Mounting the Gateway Unit
4.
Connect the WAN port on the Gateway’s rear panel to the Ethernet socket on your
broadband modem using an Ethernet cable.
5.
Connect a LAN port on the Gateway’s rear panel to the network socket on your PC using an
Ethernet cable.
6.
Connect additional PCs to the other LAN ports as described in the previous step.
7.
Use Phone cables to connect the telephones to the Phone1 and Phone2 ports on the rear of
the Gateway. (If your provider enables only one phone line, connect the phone to the Phone1
port)
It is possible to connect up to five phones in parallel to each phone port. To do so, connect a
5-way splitter to the phone port. (If your provider enables only one phone line, use the
Phone1 port on the Gateway).
8
Connect the Phone cable from the PST N wall socket to the Gateway’s PST N port.
