A C C E S S 2 4 1 - F X O / 2 4 1 / 2 1 1 / 2 1 1 N V O I P G A T E W A Y U S E R G U I D E
MN100129 Rev E
33
9.
Scroll down to the bottom of the Web page, and click
Save WAN Settings
.
10. Select
Reset
in the vertical menu bar, to reset the Gateway (see section “
”.).
Enabling Point-to-Point Protocol over Ethernet (PPPoE)
If you have a DSL modem and are NO T using a router between the Gate way and the
modem, configure PPPoE as follows:
1. In the horizontal menu bar of the
W AN
page, select
PPPoE
.
The
WAN PPPoE C onfiguration
page appears (Figure 8).
Figure 8: WAN PPPoE Configuration Page
2. Select
Yes
in the
Enable PPPoE
drop-down list box.
3. Fill in the username and password in the
Authentication
fields as supplied by your DSL
provider. Optionally you can enter the service name for the requested service. To select a
specific provider, enter his access name in the AC name field. Click
Save PPPoE Settings
.
4. Select
Reset
in the vertical menu bar, to reset the unit (see “
