A C C E S S 2 4 1 - F X O / 2 4 1 / 2 1 1 / 2 1 1 N V O I P G A T E W A Y U S E R G U I D E
MN100129 Rev E
43
Figure 17: Password Protection Page
4. Enter your User Password.
5. Click
Authenticate
. The application home page opens.
Once you have created a password, the Gateway’s Web management system will logout
automatically after 10 minutes. It is recommended to
Logout
after configuration.
Line Configuration
The
Line Configuration
Web pages,
Line1, Line 2
and
Line3
, allow you to configure the Call
Forwarding settings and volume (Gain) settings.
Call Forward Line Configuration
The following
Call Forward
settings are available for Line 1 and Line 2:
•
Disabled
•
Unconditional
The call is always diverted to another destination.
•
Conditional
Callees frequently wish to redirect incoming calls to an alternative destination if the primary
destination fails to answer within 20 seconds. The reasons for failure include busy callee,
callee’s phone is disconnected, callee does not answer, or callee denying the incoming call. The
alternative destination is typically a voicemail system but it may also be another human or
some other SIP device.
The Forwarding settings can be selected for each line separately.
Gain Control Configuration (Volume)
The following
Gain Control
Configuration
settings for (VoIP) internet telephone communication
are available for
Line 1
and
Line 2 (FXS)
:
•
The
Line (input) Gain
range is <+12 to -12>. This sets the volume at which the callee
hears you.
•
The
He adse t (output) Gain
range is <+12 to -12>. This sets the volume at which you
hear through the headset. If this volume is too high, there is an echo in the headset.
