Tektronix VM700T, User Manual

Page: 62 / 138

Configuring the VM700T Video Measurement Set
VM700T Option 01 (NTSC) & Option 11 (PAL) User Manual
2- 25
To change a Port or Format Assignment:
1. Select the parameter you wish to change by rotating the knob until the
parameter is highlighted, then touching the screen over the parameter value.
A box appears around the item to edit (see Figure 2--9).
Copy
Port: Parallel
Report
Port: Serial Port 0
Format: Epson LQ
Log
Port: None
Format: ASCII
Port: GPIB
Remote
Communication Setup
Accept
Input
Figure 2- 9: Communication Setup file with Copy Format selected
2.
Rotate the control knob until the desired parameter value appears in the box.
3.
Press the
Accept Input
soft key or touch the screen anywhere inside the
window (between the two light horizontal lines).
4. Press the Update & Exit soft key to save the changes (see Figure 2--10).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com