Tektronix VM700T, User Manual

Page: 25 / 138

Installation
1- 8
VM700T Option 01 (NTSC) & Option 11 (PAL) User Manual
6. Follow the written directions. Pressing AUTO aborts the calibration process
and returns you to the VM700T startup menu. Pressing any other button
stores the setting in NVRAM and brings up the next touch screen calibration
menu.
After making the adjustment requested and storing the current setting, a second
set of instructions are displayed as shown in Figure 1--5. Follow the directions
given in the screen.
Use the knob to adjust horizontal position
--- TOUCH PANEL INTERFACE CAL (DISPLAY) ---
and squareness of the screen border lines.
Press ‘AUTO’ button to abort, or any other
to accept and store current setting.
Current Setting: 14
Figure 1- 4: Touch screen calibration (display)
--- TOUCH PANEL INTERFACE CAL (PANEL) ---
(press ‘AUTO’ to abort)
TOUCH THE DOT INSIDE THE SQUARE
---Place finger tip directly over the dot,
being careful to avoid parallax
---Keep touching the dot until the square
highlights (and beeper sounds)
1 2
3 4
SQUARE LOCATIONS SEQUENCE:
---SQUARES will appear near
the screen corners
---Sequence will be:
1, 2, 3, 4, as shown
Screen
Figure 1- 5: Touch screen calibration (panel)
After the dots at all four corners have been touched, a screen displaying the panel
calibration factors is displayed as shown in Figure 1--6. From that screen, you
can press any key to return to the VM700T startup menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com