Tektronix VM700T, User Manual

Page: 28 / 138

Installation
VM700T Option 01 (NTSC) & Option 11 (PAL) User Manual
1- 11
Alarm
connector
VGA
output
RS-232 ports
Parallel
printer port
Fan exhaust
Port 0 Port 1
Figure 1- 9: VM700T rear panel
The Port 0 and Port 1 communication ports may be configured as serial RS-232C
DTE ports. These are DB-9 male connectors. The serial interface parameters
given in Table 1--1 are user selectable using menu control. If you are connecting
the port to another terminal, you will need a null modem connector to make the
appropriate connections. You must supply an appropriate printer cable to make
the connection between the VM700T and your printer.
Table 1- 1: Serial port protocol
Capabilities
Description
Serial ports
Port 0 and Port 1 RS-232C
Connector DB-9, male; configured as DTE ports
Serial Interface Parameters
RS-232C
Baud Rate User selectable: 300, 600, 1200, 2400, 4800, 9600, 19200,
and 38400.
Flow Control XON/XOFF, CTS/RTS, and None.
Signal Bits 7 or 8
Stop Bits 1 or 2
Parity Odd, Even, and None
RS-232C Interface
Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com