Tektronix VM700T, User Manual

Page: 47 / 138

Configuring the VM700T Video Measurement Set
2- 10
VM700T Option 01 (NTSC) & Option 11 (PAL) User Manual
To Enter a Directory. Touch the icon showing the name of the directory you wish
to enter.
Whenever a directory is open, another soft key, labeled Leave Directory, appears
below the directory window.
Audio_Limi
t
Files
Switch
NTSC/PA
L
Print
File
Leave
Directory
In /nvramØ/ConfigFiles
Audio_Sourc
e
Files
Audio_Source
Identification
Auto_Limi
t
Files
Communica-
tion
Setup
Component
NTSC Files
Diagnostic
Errors
Diagnostics
Selection
Echo_Rounding
Measure_Lim
it
Files
Measure-
ment
Locations
Camera
Testing
Figure 2- 4: Typical Configure directory
To Leave a Directory. Select the Leave Directory soft key. This closes the current
directory and opens the next higher directory in the directory structure.
When you open a directory, a line appears below the directory window (but
above the soft keys), indicating the path (the directory or file location in the
directory structure) to the displayed directory. For example, if you were viewing
the contents of the Measure_Limit~Files directory, the path line would read:
In /nvramØ/ConfigFiles/Measure_Limit~Files
This indicates that the path from the “root” of the directory structure (designated
by the initial ‘/’) goes through directory nvramØ, then through a subdirectory of
nvramØ named ConfigFiles, to the current directory, which is a sub-directory of
ConfigFiles named Measure_Limit~Files.
When editing a limits file for the Measure mode named
“User’s_Measure~Limits_File,” the path line would read:
Editing User’s_Measure~Limits_File
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com