Tektronix VM700T, User Manual

Page: 52 / 138

Configuring the VM700T Video Measurement Set
VM700T Option 01 (NTSC) & Option 11 (PAL) User Manual
2- 15
NOTE
. The first line of a file is often a title line. You may edit this line to provide
a more descriptive identifier about the content or purpose of the file you are
creating. Editing the title line of a file does not change the file name.
To Change a Text Line. Touch the line. A box appears around the line and the soft
key keyboard appears below the directory window (see Figure 2--6).
1.
Type the new text, keeping the following things in mind:
H
Typing always inserts characters at the cursor position. The cursor can be
moved left or right by turning the control knob.
H
To delete characters, move the cursor to the right of the character to be
deleted, then press the Back Space key.
H
Pressing the Set1 soft key allows you to enter numerals and punctuation
characters. Pressing the Set2 soft key allows you to enter various special
characters. Pressing the Shift key allows you to enter uppercase
characters or more punctuation characters (in the case of the shifted
versions of Set1). Both the Set1 and Set2 character keys and the Shift
key lock when selected. Set1 and Set2 are unlocked by touching the
same key again or touching the unselected key of the pair. Shift is
unlocked by touching Shift again.
2. Touch Cancel to quit the editing process without entering the new text, or
touch
Done
when you are finished to enter the new title line text.
To Change a Parameter in a File. Use the control knob to scroll the line containing
the parameter use wish to change to the center of the display window. The active
line to edit is highlighted (made brighter). Refer to
Communication Setup (File)
on page 2--23 for an example of this type of editing.
1. Touch the parameter in the highlighted line you wish to change. A box
appears around the selected parameter.
2.
Rotate the control knob to scroll through the values or selections available
for that parameter.
3. Touch the Accept Input soft key, or touch the screen anywhere inside the
directory window, to accept the new selection.
NOTE
. In the Selected Measurements file(s) and the Diagnostics Selection file,
parameters are either Selected (on the left side of the display) or Not Selected
(on the right side of the display).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com