manualshive.com logo in svg

Tektronix Phaser 600, Service Manual, Page: 90 / 286

Share
Download
Tektronix Phaser 600 Service Manual Download Page 90

 

4-6

 

Phaser 600 Color Printer

 

4

 

Key Operator Training

 

Accessing the printer’s web page

 

 PhaserLink, the Tektronix implementation of a World Wide Web server inside 
the printer, allows a customer to communicate to the printer using a web 
browser.  With PhaserLink, a customer can view and set printer and networking 
parameters.  A homepage built into the printer links the printer to other 
homepages such as the Tektronix World Wide Web home page.

To view the printer’s homepage, the printer must be connected to a network 
supporting TCP/IP protocols.  Refer to the 

 

PhaserShare Network Cards and 

Software User Manual

 

.  

 

Electronic Bulletin Board Service

 

Tektronix supports an electronic bulletin board service (BBS) for customers with 
a modem; they can connect to the bulletin board to download the latest versions 
of Tektronix drivers and software.  To access the BBS 24 hours a day, 7 days a 
week, call 

 

(503) 685-4504.  

 

Use 9600 baud, 8 bits, 1 stop bit, and no parity.

Tektronix color printer support is also available through on-line services

 

■

 

World Wide Web:  http://www.tek.com/Color_Printers/

 

■

 

Tektronix anonymous ftp server: ftp.tek.com/Color_Printers

 

■

 

Automatic File Server:  [email protected]

 

■

 

Technical support:  [email protected]

 

■

 

America Online:  Keyword: Tektronix

 

■

 

Compuserve  Go Tektronix

 

Using the automated fax systems

 

As an alternative to the Customer Support Hotline, and to provide up-to-date 
information quickly, Tektronix has set up HAL (Highly Automated Library) and 
EuroHAL, two interactive, automated fax systems. These automated fax systems 
provide Macintosh, PC, and workstation users with the latest technical hints and 
tips (like color adjustments), solutions to common technical problems, and 
application notes for software problems (such as CorelDRAW! and 
QuarkXpress).

Customers may call HAL or EuroHAL from anywhere in the world.  The fax 
systems are available 24 hours a day, seven days a week.  

 

Use HAL to order a catalog or individual documents in the U.S.A. and Canada

 

If customers have a fax machine and a touch-tone voice telephone, they can 
order a HAL catalog, listing all of the information offered by HAL, by calling 

 

(503) 682-7450

 

 (direct) or, in the U.S. and Canada, call 

 

1-800-835-6100

 

.

Summary of Contents for Phaser 600































































































































































































































































































Reviews:

No comments