Service Manual
9-9
Checks and Adjustments
9
Lower roller guide alignment
1.
Turn off the printer.
2.
Remove the media roll and the roll cover. Remove the front cover
plate located in front of the fuser.
3.
Open the fuser.
4.
Loosen the four alignment screws reached through the access holes
through the fuser.
5.
Place the alignment shims in place between the fuser and the lower
roller guide. The shims should be under the lower roller guide and on
top of the fuser.
6.
Gently bring the fuser to a near-closed position, until it stops.
7.
Tighten the four alignment screws.
