manualshive.com logo in svg

Tektronix Phaser 600, Service Manual, Page: 182 / 286

Share
Download
Tektronix Phaser 600 Service Manual Download Page 182

 

8-10

 

Phaser 600 Color Printer

 

8

 

Field Replaceable Unit Disassembly/Assembly

 

Y-axis (drum) motor and belts

 

1.

 

Turn off the printer.  Leave the power cord plugged in to provide a 
discharge path for static electricity.  

 

2.

 

Remove the left cover as explained in the earlier procedure, “Left 
cover” on page 8-3.  

 

3.

 

Remove the fuser motor as described in the earlier procedure, “Fuser 
motor” on page 8-6.  

 

4.

 

Disconnect the wiring harness.

 

5.

 

At the left end of the printer, remove the four screws securing the 
Y-axis motor bracket to the printer frame.  Remove the motor and 
bracket. 

 

Tools required

 

■

 

#1 POSIDRIV® screwdriver

 

Figure 8-9   Removing the Y-axis (drum) motor

Screws

Disconnect
wiring harness

Y-axis
motor

9482-32

Summary of Contents for Phaser 600































































































































































































































































































Reviews:

No comments