Service Manual
2-9
Installing the Printer and Drivers
2
5.
Raise the levelers at each end of the printer. There is one leveler next
to each wheel.
6.
Remove the block of wood from the left side of the printer and place it
under the ramps for support.
Removing the printer from the shipping pallet
Warning
Because of its size and weight, always use two people to move the
printer off or onto the ramps; also, make sure that you guide the
printer slowly down the ramps so that it doesn’t roll into anyone or
anything. Failure to do so may injure a person or damage the
printer.
1.
Gently move the printer so that the printer’s wheels align with the
ramps. Unlock the wheels.
2.
Gently guide the printer onto the ramps and down to the floor.
Figure 2-3 Remove the wooden block
3-2628-07
