Tektronix Phaser 600 Page 167 Service Manual Download

Page: 167 / 286

Service Manual

7-15

Cleaning and Maintenance

Cleaning the printhead and head wiper

If your prints have missing dots in a vertical row or a missing horizontal line,
first clean the printhead, using the front panel menu function:

Press the

Menu

button on the front panel.

Press an arrow button (

--->

) until the front panel displays this

message:

Utilities

<--- ---> Menu

Press the

Menu

button.

Press an arrow button until the front panel displays this message:

Clean Head

<--- ---> Select

Press the

Select

button.

Press an arrow button until you see this message:

Test Print

<--- ---> Print

Press the

Print

button; the Test Print demonstrates the condition of

the printhead jets.

If this does not clear the problem, clean the head wiper manually, using the
following procedure:

Make sure that the

Ready

message appears in the front panel; then

open the top cover.

Warning

The printhead is hot. Do not touch it.

Use an alcohol-dampened swab to clean the head wiper.

Summary of Contents for Phaser 600































































































































































































































































































Search results

Summary of Contents for Phaser 600

Reviews:

Related manuals for Phaser 600

Brands by name

Popular brands

Tektronix Phaser 600, Service Manual

Search results

Summary of Contents for Phaser 600

Reviews:

Related manuals for Phaser 600

Brands by name

Popular brands