Service Manual
2-37
Installing the Printer and Drivers
2
7.
In the Install PostScript Printer from PPD dialog box, select the
directory and drive for the printer’s CD-ROM and the ADOBEPS4
directory. Select your printer, then click Next.
■
Select Tektronix Phaser 600 if you have the standard version
of the printer.
■
Select Tektronix Phaser 600 with Extended Features if you have the
printer’s Extended Features option.
Note
If you are not sure which configuration of the printer you have, the
printer’s startup page lists this information under Extended
Features: Yes/No
.
8.
In the Local Port Selection dialog box, select the port you want to use,
then click Next. (You can configure the port in this dialog box at any
time.)
9.
In the Add Printer dialog box, type in the printer’s name, select the
printer as default, and decide if you want to print a test page. Click
Next
to continue.
10.
If you see the Different Versions Detected dialog box, click Next to
update the files from the printer’s CD-ROM.
11.
When the installation is finished, the Tektronix Phaser 600 Properties
dialog box appears. Make selections in the driver, referring to Chapter
3 for more information on printer options.
Note
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the Adobe PS 4 driver.
