Tektronix PFG 5105, Instruction Manual

Page: 78 / 89

Programming
Table 3-1 (cont)
ERROR QUERY AND STATUS INFORMATION
(Bus Reportable)
EXECUTION ERRORS (200) (cont)
Error Error Type/Message Priority
282
Delay out of range
03
283
W + D > 0.85 P
03
284 P - (W + D) < = 40 ns
03
285 D < = W
03
286
D
< =
W
+
NI
03
290 Synt illegal data
03
INTERNAL ERRORS {300)
SRQ byte 99 or 115 (busy bit set)
Error Error Type/Message Priority
340 Save RAM failure 05
350
Synthesizer out of lock 05
PFG 51 05/5505 Instruction Manual
Description
This error will be returned if the delay is set greater
than the period and the mode is set to continuous
or burst mode.
This error is returned if width + delay > 0.85 x
period (single or double pulse).
This error is returned if period > width + delay +
40 ns (single or double pulse).
This error is returned if delay =::width (double pulse
only).
This error is returned if delay =::width + NI (double
pulse only).
Width Range D-W > NI
0.40 - 0.099 !:,lS
40 ns
0 .. 1 00 -0.999 !:,lS
50 ns
1 .00 - 9.99 !:!:.S
200 ns
1 0.0 - 99.9 !:,lS 2.0 /lS
1 00 - 999 !:,lS 20 /lS
1.00 - 9.99 ms 200 us
10.0 - 99.9 ms 2.0 ms
Frequency out pf range of the synthesizer.
Description
If the checksum of the Save RAM is bad, this error
will be returned.
This error will be returned if the synthesizer is not
locked. An internal error is returned by a serial poll.
3-33