Tektronix PFG 5105, Instruction Manual

Page: 7 / 89

OPERATORS SAFETY SUMMARY
The general safety information in this part of the
summary is for both operating and servicing person­
nel. Specific warnings and cautions will be found
throughout the manual where they apply, but may
not appear in this summary.
TERMS
In This Manual
CAUTION statements identify conditions or practices
that could result in damage to the equipment or other
property.
WARNING statements identify conditions or practices
that could result in personal injury or loss of life.
As Marked on Equipment
CAUTION indicates a personal tnJury hazard not
immediately accessible as one reads the marking, or
a hazard to property including the equipment itself.
DANGER indicates a personal injury hazard immedi­
ately accessible as one reads the marking.
SYMBOLS
In This Manual
A
This symbol indicates where applicable
cautionary or other information is to be
found.
As Marked on Equipment
f
DANGER-High voltage.
@
Protective ground ( earth) terminal.
A
ATTENTION-refer to manual.
Power Source
This product is intended to operate from a power
source that will not apply more than 250 volts rms
between the supply conductors or between either
supply conductor and ground. A protective ground
connection by way of the grounding conductor in the
power cord is essential for safe operation.
iv
Grounding the Product
This product is grounded through the grounding
conductor of the power cord. To avoid electrical
shock, plug the power cord into a properly wired
receptacle before connecting to the product input or
output terminals. A protective ground connection by
way of the grounding conductor in the power cord
is essential for safe operation.
Danger Arising from Loss of Ground
Upon loss of the protective-ground connection, all
accessible conductive parts (including knobs and
controls that may appear to be insulating) can render
an electric shock.
Use the Proper Power Cord (PFG 5505)
Use only the power cord and connector specified for
your product.
Use only a power cord that is in good condition.
For detailed information on power cords and connec­
tors, see the Operating Instructions.
Refer cord and connector changes to qualified service
pesonnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse of correct
type, voltage rating and current rating as specified
in the parts list for your product.
Refer fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in
an explosive atmosphere, unless it has been specifi­
cally certified for such operation.
Do Not Operate Without Covers
To avoid personal injury, do not operate this product
without covers or panels installed. Do not apply power
to the plug-in via a plug-in extender.
PFG 5105/5505 Instruction Manual