Tektronix NetTek YBT250, User Manual

Page: 92 / 338

GPS
2- 52
YBT250 Field Transmitter & Interference Tester User Manual
YBT250 GPS Configuration
To configure your GPS receiver with the YBT250, do the following:
1.
Connect your GPS receiver to the NetTek Analyzer Platform.
Refer to the GPS receiver instructions for details.
2. Tap the status button to open the GPS tab. See Figure 2--18.
Figure 2- 18: The GPS tab
3. Select the correct GPS receiver type in the GPS Receiver
drop--down list. The YBT250 establishes communication with the
GPS receiver and displays data in the GPS status and information
fields. This may take a few moments depending on your GPS
receiver, the GPS signal quality and available satellites. Signal
acquisition and satellite signal lock times vary depending on the
GPS receiver in use.
4. Check that the latitude and longitude information are correct for
your location. If the YBT250 does not display correct GPS
information within about four minutes, see
Troubleshooting GPS