Tektronix NetTek YBT250, User Manual

Page: 286 / 338

Appendix A: Specifications
A- 26
YBT250 Field Transmitter & Interference Tester User Manual
Table A- 10: Electromagnetic compatibility (EMC)
Category Standards or description
EC Declaration of
Conformity -- EMC Meets the intent of Directive 89/336/EEC for Electromagnetic
Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European
Union:
EN 61326 Annex D, EMC requirements for Class A
electrical equipment for measurement,
control, and laboratory use
1
,2,3
IEC 61000-4-2 Electrostatic discharge immunity
IEC 61000-4-3
4
Radiated RF electromagnetic field immunity
IEC 61000-4-4 Electrical fast transient/burst immunity
IEC 61000-4-5 Power line surge immunity
IEC 61000-4-6
4
Conducted RF immunity
IEC 61000-4-11 Voltage dips and interruptions immunity
EN 61000-3-2 Conducted power line harmonic current
EN 61000-3-3 Voltage changes, fluctuations, and flicker
Australia/New Zealand
Declaration of
Conformity -- EMC Complies with EMC provision of Radiocommunications Act per the
following starndard(s):
1
,2
AS/NZS 2064.1/2 Industrial, Scientific, and Medical Equipment:
1992
1
EMC compliance was demonstrated using high-quality shielded interface cables.
2
Emissions that exceed the limits of this standard may occur when the instrument is
connected to a test object.
3
Minimum immunity test requirement.
4
Residual spurious signals can increase to -70 dBm with exposure to the disturbance
levels of this test.