Tektronix NetTek YBT250, User Manual

Page: 244 / 338

Saving, Exporting, and Recalling Results, Traces and Settings
3- 142
YBT250 Field Transmitter & Interference Tester User Manual
NOTE
. You should use an optional PCMCIA memory card if you plan
to save a lot of measurement data to memory (test measurement
results, signal traces, auto saved spectrogram or codogram results,
and so on). Using an optional PCMCIA memory card for measure-
ment data keeps the BuiltInDisk memory available for application
use.
Saving Measurement Results
The YBT250 enables you to save a measurement result to a file for
later recall. Saving measurement results is meant for use in
reproducing a Measure
display on the YBT250 at a later time.
Recalling a saved file allows you to use markers (if available for the
measurement) to further analyze the result. When results are
recalled, they appear in the display just as they did when saved. To
use measurement
data results in another program for analysis or
generating a report, use the Export Results function; see
page 3--145.
To save measurement results:
1. Take the measurement you want to save.
2. Select File > Save Results As (Save Results appears only when
the Measure window is selected; Save Trace appears when the
Spectrum and Interference windows are selected.).
3. Select the folder where you want to save the results.
4. Type a name for the file. Tap , in the taskbar, to display the
soft keyboard. Tap again to hide the keyboard when you are
finished.
5. Tap OK to save the file.