Tektronix NetTek YBT250, User Manual

Page: 245 / 338

Saving, Exporting, and Recalling Results, Traces and Settings
YBT250 Field Transmitter & Interference Tester User Manual
3- 143
What is Saved in a Measurement Results File
The following information is saved in the results file for each
included measurement:
H
Name of the measurement
H
Measurement results and units
H
Pass/fail status of the measurement (if limit testing is enabled)
H
Time and date of the measurement
Additional information saved in a results file includes:
H
Technician name
H
User notes
H
Setup information that is visible in the results display
H
Error information (if errors were present)
H
GPS coordinates (Refer to page 2--51 for GPS set up
information.)
Recalling Measurement Results
You can recall saved measurement results for display. When saved
measurement results are displayed, the display appears just as it did
when the measurement was saved except for the status area of the
control bar.
To recall measurement results for display:
1. Select File > Open .
2.
Locate the directory that contains the measurement results file
(the default is \BuiltInDisk\YBT250\AppData\Results).
3. Select the results file to recall and tap OK . The Cammand bar
shows results information. See Figure 3--70.
4. To restart measurements, tap the Run button .