Tektronix NetTek YBT250, User Manual

Page: 240 / 338

Taking Measurements
3- 138
YBT250 Field Transmitter & Interference Tester User Manual
You can use the file menu to save, export, or print the numeric
Sequencer data, including error information and the timestamp (the
time of the last individual measurement taken). Note that if you
export a screen, a picture of only what shows on the screen will be
exported. If there is a scroll bar visible, then some measurement
results are hidden and are not exported. To avoid this problem,
choose
Export Results As... , or scroll down and export a second
view of the screen.
Limit Testing
The YBT250 can be set to display indicators or perform an action
when a measurement exceeds specified limits. The available limit
tests depends on the selected standard.
To enable limit testing:
1. Tap the Edit button at the top of the display. This displays the
Setup window.
2. Tap the Limits tab. See Figure 3--69.
3. Select the signal standard from the list at the top of the window.
4.
Tap the appropriate check box in the
Enable
column at the left
side of the window to enable or disable a limit test for a
measurement. To disable limit testing for a specific measure-
ment, tap the check box so that there is no X in the box.
a. To enable limit testing for all the measurements, tap the
Enable All button.
b. To disable limit testing for all the measurements, tap the
Disable All button.