Tektronix NetTek YBT250, User Manual

Page: 33 / 338

Getting Started
YBT250 Field Transmitter & Interference Tester User Manual
1- 13
Shutdown Mode
To completely power down the NetTek Analyzer Platform, do the
following:
1. Select Start > Programs > Shutdown .
2. In the Shut Down dialog box, select Shutdown .
A shutdown clears volatile memory, including the module software if
it is loaded in volatile memory, user setups, and measurement data
not saved to nonvolatile memory. For information on how to save
these items to nonvolatile memory:
1. Select Start > Help .
2. In the Help window select Tektronix Basics .
3. Select Store Data in Nonvolatile Memory .
The next time you press the front-panel power switch, the NetTek
Analyzer Platform cycles through the complete power up process,
taking about 30 seconds to completely power up.
Restart (Software Reset)
If the NetTek Analyzer Platform or module application stops
responding correctly, try performing a restart to clear the problem.
To restart the module software, do the following:
1. Select Start > Programs > Shutdown .
2. In the Shut Down dialog box, select Restart .
The display blanks for approximately five seconds. The module
software reloads and restarts. A restart does not empty volatile
memory.