Tektronix MDO4054-3, User Manual, Page: 82 / 222

Acquire the Signal
5. Optionally, push B1 Label to edit the label for
the bus. (See page 51, Labeling Channels
and Buses .)
Bus B1
Parallel
De fi ne
Inputs
Thresholds B1 Label
Parallel
Bus
Display
Event
Table
6. Push Bus Display and use the side-bezel
menu to de fi ne how to display the parallel or
serial bus.
Bus
Depending on the bus, use the side-bezel
menu or the knobs to set the number format. Bus and
Wave-
forms
Hex
Binary
ASCII
7. Push Event Table and select On to display a
list of bus packets with timestamps.
Event
Table
On |Off
Save
Event
Table
For a clocked parallel bus, the table lists the
value of the bus at each clock edge. For
an unclocked parallel bus, the table lists the
value of the bus whenever any one of its bits
changes.
The Event Table lists bytes, words, or
packets, depending on the bus type.
8. Push Save Event Table to save the event
table data in a .csv (spreadsheet) format on
the currently selected storage device.
MDO4000 Series Oscilloscopes User Manual 63