Get Acquainted with the Instrument
Using Other Controls
These buttons and knobs control waveforms, cursors, and other data input.
1.
Waveform
Intensity
. Push to enable
multipurpose knob
a
to control waveform
display intensity and knob
b
to control
graticule intensity.
2. Cursors
. Push once to turn the cursors
on. When the cursors are on, you can
turn the multipurpose knobs to control
their position. Push again to turn them
off.
Push and hold to show the cursor menu
and con
fi
gure the cursors. Push
Menu
Off
when done to return control of the
cursors to the multipurpose knobs.
3. Fine
. Push to toggle between making
coarse and
fi
ne adjustments with the
vertical and horizontal position knobs, the
trigger level knob, and many operations
of multipurpose knobs
a
and
b
.
4.
Turn the lower multipurpose knob
b
,
when activated, to move a cursor or set
a numerical parameter value for a menu
item. Push
Fine
to make adjustments
more slowly.
5. Select
. Push to activate special
functions.
For example, when using the two vertical
cursors (and no horizontal ones are
visible), you can push this button to link
or unlink the cursors. When the two
vertical and two horizontal cursors are
both visible, you can push this button to
make either the vertical cursors or the
horizontal cursors active.
You also can use the
Select
button with
the
fi
le system operations.
38
MDO4000 Series Oscilloscopes User Manual
Summary of Contents for MDO4054-3
