Tektronix MDO4054-3, User Manual, Page: 22 / 222

Installation
Optional accessories (cont.)
Accessory Description
Tektronix part
number
FlexRay, CAN, and LIN serial triggering and
analysis application module This module enables triggering on packet level
information in FlexRay, CAN, and LIN buses.
Also, it provides digital views of the signal, bus
views, packet decoding, search tools, packet
decode tables with time stamp information and
eye diagram analysis software. DPO4AUTOMAX
Computer triggering and analysis application
module This module enables triggering on RS-232,
RS-422, RS-485 and UART serial buses.
Also, it provides digital views of the signal,
bus views, packet decoding, search tools,
and packet decode tables with time stamp
information. DPO4COMP
Embedded serial triggering and analysis
application module This module enables triggering on packet
level information on I
2
C and SPI serial buses.
Also, it provides digital views of the signal,
bus views, packet decoding, search tools,
and packet decode tables with time stamp
information.
DPO4EMBD
Ethernet serial triggering and analysis
application module
This module enables triggering on 10BASE-T
and 100BASE-TX buses. Also, it provides
search tools, bus views, and decode tables
with time stamp information. DPO4ENET
Limit and mask test application module This module supports limit testing and testing
on telecom standard masks or custom masks. DPO4LMT
Power analysis application module This module supports measurements of power
quality, switching loss, harmonics, ripple,
modulation, safe operating area, and slew rate
(dV/dt and dI/dt). DPO4PWR
Universal Serial Bus triggering and analysis
application module This module enables triggering on packet level
information on USB 2.0 serial buses. Also, it
provides digital views of the signal, bus views,
bus decoding data in hex, binary, and ASCII,
search tools, and packet decode tables with
time stamp information. DPO4USB
Extended video application module This module enables triggering on a variety of
standard HDTV signals, as well as on custom
(non-standard) bilevel and trilevel video signals
with 3 to 4,000 lines. DPO4VID
Advanced RF triggering application module This module enables triggering with RF power
as the source for Pulse Width, Timeout, Runt,
Logic, and Sequence triggers MDO4TRIG
NEX-HD2HEADER Adapter that routes the channels from a Mictor
connector to 0.1 inch header pins NEX-HD2HEADER
TPA-BNC TekVPI to TekProbe II BNC Adapter TPA-BNC
TEK-USB-488 Adapter GPIB to USB Adapter TEK-USB-488
MDO4000 Series Oscilloscopes User Manual 3