Tektronix MDO4054-3, User Manual, Page: 175 / 222

Analyze Waveform or Trace Data
3. Push the lower-bezel menu Select Mask
item and, from the resulting side menu,
select
Standard
.
4. Push the lower-bezel Select Standard .
5. Use the resulting side menu items to select
the desired standard to use.
6. Push OK Apply Standard
on the side-bezel
menu.
Create a custom mask.
There are three ways to create a custom mask. You can edit a standard mask, load a mask
from a text fi le, or create a mask via a remote interface.
Create a custom mask by editing a standard mask.
1. Push the front-panel Test button.
2. Push the lower-bezel menu Application
item. Turn multipurpose knob a to select
Limit/Mask Test from the menu.
3. Push the lower-bezel menu Select Mask
item and, from the resulting side menu,
select
Standard .
4. Push the lower-bezel Select Standard .
5. Use the resulting side-bezel menu to select
the desired standard to use.
6. Push OK Apply Standard on the side-bezel
menu.
7. Push the lower-bezel Set Up Mask .
8. Push Copy Active Mask to Custom from
the resulting side-bezel menu.
156 MDO4000 Series Oscilloscopes User Manual