Application Examples
7.
Analyze the physical layer. For example, you
can use the cursors for manual measurements.
(See page 207,
.) You can also use the automated
measurements. (See page 190,
8.
Push
Search
. Set
Search Marks
to
On
. Enter
a search type, source, and other parameters
as relevant on the lower-bezel menu and
associated side-bezel menus. (See page 224,
Using Wave Inspector to Manage Long Record
Length Waveforms
9.
Jump ahead to the next search point by
pushing the right arrow key. Push it again and
again until you see all the events. Jump back
with the left arrow key. Do you have all the
packets that you expected to have? If not, at
least you have narrowed your search down to
the last packet sent.
308
MSO4000 and DPO4000 Series Oscilloscopes User Manual
Summary of Contents for DPO4032
